| 11MS Frame Rate Capable: | Allows for ultra high speed response rate |
| 128 x 64 Screen Resolution: | Larger viewing area |
| 2 Model Types: | Both airplane & helicopter programming in one radio system |
| 2000mAh NiMh AA welded battery pack: | Extended run time; security & durability of heatshrink/welded pack |
| 2048 Resolution: | Provides 2048 steps of travel for each servo; smooth transition from stick input to servo movement |
| 30 Model Memory: | Increased data storage space for additional models |
| Data Transfer: | Allows for model programming/setup data to be transfered from one radio to another compatible radio |
| DSM2 Dualink Technology: | Second generation Digital Spread Spectrum Modulation; superior path diversity |
| Electronic 'E-Ring': | Electronically prevents overdriving the cyclic servos on helicopters |
| Included AR8000 8 channel Hi-speed recevier: | Full range 8 channel receiver is compatible with Telemetry Module; capable of sending realtime telemetry data to the transmitter |
| Mode Selectable (1-4): | Allows the user to easily change the radio between modes 1 through 4 in software and hardware |
| ModelMatch: | Prevents wrong model syndrome |
| Range Check Function: | Integrated range check function displays flight log data (antenna fades, frame losses & holds) |
| Realtime Telemetry: | Radio will display realtime monitoring of flight log data (antenna fades, frame losses & holds) |
| SD/MMC Compatible: | Increased model storage via secure digital (SD) or multi media card (MMC)data storage (sold seperately) |
| ServoSync: | Synchronised servo movement for CCPM or dual elevators |
| Timer (start on Throttle up): | Two options (up-timer) and (down timer); programmable to either the trainer switch or throttle stick |
| 12V DC w/Multi-Country Plug: | Convenience and ease of use |
| 3 Wing Types: | Dual aileron, V-tail and elevon mixing options available |
| 5 Point Graphic Pitch Curve: | Allows for adjustments of the pitch of the main rotor blades on a helicopter to optimise each flight mode |
| 5 Point Graphic Tail Curve: | Allows for adjustments of the pitch of the tail rotor blades on a helicopter to optimise each flight mode |
| 6 Programmable Airplane Mixes: | Allows for custom mixing of two servos |
| Active Gain Control: | Allows for inflight adjustment of the gyro gain settings |
| Flap Delay w/Elevator Compensation: | Adjustable control of flap servo speed |
| France Mode Selectable: | The region setting screen is used to allow the DX8 to be in compliance Worldwide |
| Language Select: | Allows user to change language displayed on the screen; English, Spanish, French, German and Italian supported |
| Low Battery Voltage Warning: | Alerst the user with both an audible and visual warning |
| Programmable Flap System: | Allows for elevator and flap positions to be programmed for landing and take-off |
| Swashplate Timing: | Allows for electronic correction of swashplate phasing; helps helicopter perform better |
| Telemetry Warning Screen (audible/buzzer): | Provides both tone and vibration alerts |
| Timer Integrated: | Tracks total on time of transmitter |
| Trainer Mode: | Allows for use of a trainer cord for teaching students to fly |
| 3 Airplane Flight Modes: | Allows versatility in programming/setups/installations |
| 3 Programmable Dual Rates: | Allows for three programmable control rates on aileron, elevator and rudder |
| 3 Programmable Helicopter Mixes: | Allows for custom mixing of two or more servos |
| 4 Micro Second Trim Steps: | Changes the servo 4 micro seconds per trim step |
| 4 Swashplate Types: | Swashplate options to match the particular swashplate on a helicopter |
| 5 Point Graphic Throttle Curve: | Allows for adjustment of the throttle to optimise engine/motor RPM |
| Contrast Adjustment: | Allows for screen contrast adjustment for optimised viewing of the display |
| Differential: | Precise electronic adjustment of aileron travel when flaperon or elevon wing types are activated |
| Digital Trims w/Dual Speed Trim Scroll: | Convenience and ease of use |
| Exponential Throw: | Allows for greatwer control; allows control/stick movements that are less/more sensitive around centre stick position |
| French Bandwith Capable: | User enabled bandwith restriction; allows compliance with French regulatory restrictions |
| Gyro Adjust (normal, stunt & hold): | Allows for seperate gyro gain values in each flight mode |
| Model Copy: | Allows user to copy model settings from one model memory to another |
| Model Name: | Allows user to name each model memory |
| Model Reset: | Allowsd user to reset each model memory to default settings |
| Roller/Selector User Interface: | Convenience and ease of use |
| Servo Monitor: | Displays servo movement direction when different programming functions, sticks and/or switches are moved |
| Servo Reverse: | Provides ability to reverse servo throw from transmitter |
| Sub Trim: | Allows the user to electroncially adjust the centering of each servo |
| Swashplate Exponential: | Allows for greater control; allows control/stick movements that are less/more sensitive around centre stick position |
| Swashplate Mix: | Allows indivdual setup of cyclic controls |
| Switch Select: | Allows user selectable/changeable switch locations |
| Throttle Cut: | Throttle channel moves to a pre-programmed position (low throttle, low trim) allowing safe and convenient shut down |
| Travel Adjust: | Allows the precise end-point adjustment of all six channels in each direction independently |
| Warning Screen (Air): | Provides audible warning to user and does not transmit whe certain switches/stick positions are not their proper locations (throttle, gear, flaps & flight mode) |
| Warning Screen (Heli): | Provides audible warning to user and does not transmit whe certain switches/stick positions are not their proper locations (throttle,stunt & hold) |
;)
